To print: Select File and then Print from your browser's menu
Infusion Site Application Adhesion Process Improvement
March 18, 2010
As longtime readers of my blog might know, I’ve written before about intermittent difficulties with infusion sites. For example, last fall I talked about difficulties keeping the infusion site attached to my person and recently I wrote about mobile infusion set site changing. Insulin pumps: you gotta love ‘em, but you also know — if you’re an insulin pump wearer — that there’s always the potentiality for issues related to insulin pumping.
Today, then, I choose to write about a very specific issue of insulin pumping and infusion site adhesion. In fact, the narrow scope of this entry might also be product-specific. If that’s the case and I’ve alienated you, I’m sorry. I’ve never used any site applicator besides the Cleo cartridges, so I don’t know if other applicators work in a similar way. Therefore, if you pump insulin and haven’t yet discovered my process — because I may just be daft; most people may have learned this trick a long time ago — or if you’re looking to attempt it yourself, you may have to modify it.
At any rate, here’s my revelation: After nearly three years of insulin pumping, I discovered a couple of weeks ago that when changing infusion sites, the one thing I’d been missing was The Twist.
You see, during the site-change process, I always have difficulty getting the adhesive tape to pull itself away from the applicator proper. What this means is that as I try to remove the applicator (see both of the purple plastic objects in the pictures provided in this entry: that whole thing is the applicator), I had been tipping it forward or back against my body as I tried to get it to dislodge and leave behind the tape/cannula button (the infusion site). More times than not what I ended up doing was pulling the newly stuck to me infusion site away from my skin, as well. That’s not good.
Why was it bad to pull the adhesive tape back? Well, that tape is mostly a one-time-best-time type of stuff. When/if I restick, it’s pretty likely the tape will want to pull away again, more easily each time, and thus have a less effective adhesion to my body. Those lesser sticks leave a more likely chance I’ll lose that site sooner, be it through rubbing it off simply by day-to-day living, having it tugged off by the infusion set tubing, sweating it off while working out, or by some bizarre happening (door/drawer knobs!).
So what is The Twist?
It’s pretty simple. After depressing the applicator against my skin and then holding it there with mild pressure for about ten seconds (to get much better stick-to-it while the adhesive does its thing), rather than the tipping process I’d been using, I now give it a gentle yet firm clockwise or counterclockwise twist (or some combination of both) as I pull the purple applicator, ever so gently, away from my body with an ever-so-slight tipping motion.
What happens during this process is that rather than using only the little bit of adhesion force against my skin from a small percentage of the adhesive-tape from applicator, instead I’m using the entirety of the adhesive force against my skin to help dislodge it, and with that combined adhesive force, the tape doesn’t seem to want to pull away from my body.
The applicator seems to more easily let go of its grip on the infusion site.
And that’s all I’ve ever wanted.
Disclaimer of Medical Advice:You understand that the blogs posts and comments to such blog posts (whether posted by us, our agents, bloggers, or by users) do not constitute medical advice or recommendation of any kind and you should not rely on any information contained on such posts or comments to replace consultations with your qualified health care professionals to meet your individual needs. The opinions and other information contained in the blog posts and comments do not reflect the opinions or positions of the Site Proprietor.