Diabetes Self-Management Articles

These articles cover a wide range of subjects, from the most basic aspects of diabetes care to the nitty-gritty specifics.

Links not loading properly?

Some of our pages use Portable Document Format (PDF) files, which require Adobe Acrobat Reader. To download Acrobat Reader for free, visit www.adobe.com.

Sign up for our weekly e-mail newsletter and receive a FREE GIFT! Enter your e-mail below.

Learn more

Learn more about diabetes

Links to help you learn more about diabetes.

Ask a diabetes expert
Other diabetes resources
Browse article topics

 

Continuous Glucose Monitoring
Getting Started

by Linda Mackowiak, M.S., R.N., C.D.E.

Even with regular blood glucose monitoring, one of the big unknowns in diabetes self-management is what happens to glucose levels between blood glucose checks. In recent years, however, the development of continuous glucose monitors that check glucose levels in the fluid just under the skin have started to change all that. The newest continuous glucose monitors measure glucose levels continually around the clock and display results every few minutes.

The first continuous glucose monitoring systems simply collected data, which had to be uploaded to a computer for analysis. When the numbers were plotted on a graph, it became possible to see, for example, whether glucose levels were rising after meals or getting too low overnight.

The newer systems display glucose readings on a screen, so the user can see, in real time, what his glucose level is and whether it is rising or falling. The newer systems can also be programmed to sound an alarm when the user’s glucose reaches high or low levels. Some systems are able to display graphs showing glucose levels over a certain number of hours on the display screen. And the data collected by all the systems can still be uploaded to a computer for graphing and analysis, if desired. (See “Devices on the Market” to learn more about currently available continuous glucose monitoring systems.)

For all the information they provide, however, continuous monitoring devices do not replace regular blood glucose monitoring. Continuous monitoring systems must be periodically calibrated with conventional blood glucose meters using fingerstick blood samples for accurate readings. In addition, users are advised to do a conventional blood glucose check before making any changes in their diabetes care regimen.

How glucose sensors work
The glucose sensors used in continuous glucose monitors are small electrodes that the user places under the skin using an introducer needle and a spring insertion device that is similar to a lancing device or insulin pump infusion set inserter. Once the sensor is inserted, the introducer needle is removed, and only the sensor remains under the skin, held in place with an adhesive patch. The sensor must be changed every few days, according to the manufacturer’s recommendation. Inserting a glucose sensor should not be painful, and wearing a sensor should be comfortable.

The sensor produces a very small electrical current based on the amount of glucose in the body fluid (called interstitial fluid) around the sensor. When the glucose level rises, the current rises. When the glucose level goes down, the current goes down.

The sensors presently on the market need a number of hours to settle in to the body before they can start giving accurate glucose information. When the sensor is ready, the user calibrates the device by doing a fingerstick blood glucose reading and inputting the reading into the device (different systems have different methods for inputting information). The continuous monitoring device uses the reading to determine what the measured electrical current means in terms of glucose concentration. Additional calibrations are performed while wearing the sensor, according to the manufacturer’s recommendations.

To get the most accurate readings from a continuous glucose monitor, it is important to calibrate carefully and correctly. You must use your best blood glucose monitoring technique, including checking on clean, dry fingers, using strips that have been stored properly, and coding and using your meter correctly. Remember: The sensor glucose information you get is only as accurate as the quality of the calibration you do.

Page    1    2    3    4    Show All    

Also in this article:
Devices on the Market

 

 

More articles on Tools & Technology
More articles on Blood Glucose Monitoring

 

 


Statements and opinions expressed on this Web site are those of the authors and not necessarily those of the publishers or advertisers. The information provided on this Web site should not be construed as medical instruction. Consult appropriate health-care professionals before taking action based on this information.

 

 

The Costs of Innovation
As readers of this blog surely know, living with diabetes in the United States can be expensive... Blog

Interstitial Fluid
The fluid that surrounds the cells of multicellular animals. The advent of sensors that can... Article

Bionic, Man…
So I was scouring articles online, searching for a topic to write about. I stumbled on a few... Blog

How frequently should I check my blood glucose while I'm pregnant? Get tip


Carbohydrate Restriction: An Option for Diabetes Management
Some people find that decreasing the amount of carbohydrate they eat can help with blood glucose control. Here’s what to know about this approach.

Insulin Patch Pumps: A New Tool for Type 2
Patch pumps are simpler to operate than traditional insulin pumps and may be a good option for some people with Type 2 diabetes who need insulin.

How Much Do You Know About Vitamins?
Learn what these micronutrients can and can’t do for you.

Complete table of contents
Get a FREE ISSUE
Subscription questions